AUTOMOTIVE PRODUCTS

Strands - Skylord LED Bar 20"

Strands - Skylord LED Bar 20"

High beam headlight 15800lm with integrated relay, E-mark and boost mode

Product number: 208-902001
shipping
Delivery time: 14 workdays

Description

Strands Skylord 20-inch LED Light Bar: Auxiliary high-beam headlight with E-approval ECE R148 (R7) R149 (R112) and integrated relay

Skylord light bars from Strands come with a Duo-Mode: an E-mode with E-mark certification and reduced luminosity for use as a high beam headlight on public roads, and Xperience Mode for unrestricted power in off-road use. This can be switched on outside of road traffic, e.g. on construction sites, private property or forest paths, when maximum illumination is required.

  • ECE approval as high beam (Ref. 2x20)
  • Boost mode for maximum performance
  • 15,800 active lumens (23,000 lm raw)
  • 780 m visibility range (at 1 lux)
  • Position light in white and amber (incl. switch)
  • Integrated relay and wiring harness with 2.5 m cable

In Xperience mode, the Skylord 20-inch LED light bar achieves an impressive 15,800 active (measured) lumens with a range of 780 metres. The new, innovative reflector technology guarantees maximum forward visibility without compromising on close-range and side visibility.

The aluminium housing is made from a single piece, providing optimum protection against water, corrosion, vibrations and dirt. Robust material, impact-resistant polycarbonate lens, protection class IP68/IP69K and a new type of powder coating make the auxiliary headlight from Strands a durable upgrade for any vehicle.

Skylord light bars are covered by a 5-year functional warranty from Strands Lighting Division. Click here for warranty terms and conditions. Click here for warranty conditions.

 

Installation:

Skylord LED bars feature an integrated relay and a 250 cm long power cable, which makes installation easy even in large vehicles. In addition, the auxiliary headlights come with a Strands Pro wiring harness, which also enables plug-and-play installation with the XBB dongle & power unit, for example. The wiring harness also has a pre-installed switch that allows the position light to be easily switched on and off. The multi-voltage function (10-32 V) allows installation in 12V and 24V systems.

The necessary installation accessories are included in the scope of delivery: side and mounting brackets, washers, screws, rubber pads, rubber caps with the Strands logo, and a Strands wiring harness with Dura Seals for the cables and a position light switch. A CANbus interface such as XBB may be required for installation.

 

PLEASE NOTE:

This LED driving lamp is E-approved in accordance with ECE R149 (R112) and R148 (R7) and may therefore be used as a driving light on public roads. In addition to the actual headlight approval, the installation rules on the vehicle must also be observed, which are primarily defined by ECE R48 and the German Road Traffic Licensing Regulations (StVZO). We have summarised the most important rules for you in this PDF.

 

TECHNICAL DETAILS:

Type of lamp LED
PCS 1
Voltage 10-32V DC
Theoretical effect 180W
Consumption X-mode: 170W, E-mode: 74W, Pos.: 12W
Theoretical lumen (raw) 23000lm
Actual lumen 15800lm
1 Lux @ X-mode: 780m
Color temperature 5700K
Beam pattern / angle Long-distance beam / 12.1°
Position light Yes, white and amber
Connection Cable
Cable length (mm) 2500
Material bracket Aluminium
Material housing Aluminium
Colour housing Black
Material lens Polycarbonate
Length (mm) 506
Depth (mm) 78
Height (mm) 67.5
Height including bracket (mm) 73.9
Weight (kg) 3.3
IP-Class 68/69K
Operating temperature -35°C - +60°C
E-approved Yes
According to regulation ECE R148 (R7) R149 (R112)
EMC ECE R10.06
Reference value (Ref.) 40 (2x20)
Strands Logo

Manufacturer

STRANDS Fordonskomponenter AB
Address:
Hagalundsvägen
51172 Fritsla
Schweden www.STRANDS.se
International identifier if deviating from SKU
902001

Questions

Reviews(0)

Questions

Please choose an option