AUTOMOTIVE PRODUCTS

Nissan Navara NP300 / Aluminum Wheel Spacers 60 mm per axle

Aluminum Wheel Spacers +60 mm per axle, increased load capability, up to 1250 kg per wheel

Mitsubishi L200 from 2020 / set for 2 axles

Product number: SPV-6067662
shipping
in stock
delivery approx 4 weeks

Description

Mitsubishi L200 2020 track widening 60 mm per axle (30 mm per side). A double centering of the widening allows the best possible concentricity. The wheel spacer is attached to the vehicle hub with the supplied fixing nuts. With the original mounting material, the rim is then attached to the studs which are pressed into the wheel spacer. A wheel spacer with tyres or rims different from the standard equipment is no problem. This is as well as the use of different thicknesses (e.g. front axle 23mm per side and rear axle 30 mm per side) which is often necessary and regulated in the TÜV- part certificate.
With a track widening you do not only upgrade the appearance of your Mitsubishi L200, but you also get other advantages like:
  • greater cornering stability
  • improved straight-line stability
  • Increased off-road capability
  • TÜV-certified
  • Easy mounting
Many of the wheel spacers for pickup trucks available on the market have load releases of approximately 1800 kg per axle. Since the standard L200 already has a maximum rear axle load of 2030 kg, a TÜV demonstration automatically results in an unpleasant reduction of the permissible total weight.
Our track widening has an extreme load release of 2500 kg per axle (1250 kg per track plate) and is the right solution for the L200.
 
Mounting instruction: 
Since the current EU legislation requires the entire wheel to be covered, including the wheel bead, an additional wheel cover is a requirement of the parts certificate and is usually requested by the expert.
For this we offer our fender lips as an optional solution.
A simple acceptance test must be carried out in accordance with §19 Section 3.
In the case of custom combinations (e.g. special wheels that are not listed in the TÜV certificate), an TÜV approval must be carried out in accordance with §21 or 19 para. 2. When combining with non-standard wheels, the wheel cover, clearance and the maximum permitted track width change of 4% must be observed. A combination of aluminium track widenings and steel rims is not recommended. 

Documents

Manufacturer

Hofmann GmbH
Address:
Kohlplatte 5
67376 Harthausen
Deutschland www.hofmann-spurverbreiterungen.de
International identifier if deviating from SKU
SPV 006 V60 30 Alu

Questions

Reviews(1)

Questions

Reviews(1)

(reviews)
Für den Preis unschlagbar, insbesondere wegen Radlast. Trotzdem: Das Teilegutachten widerspricht sich meiner Meinung nach. Vorne steht etwas von "Radlast: 1250 kg bei U = 2450 mm". Unter den Hinweisen steht aber "Die ... Distanzringe sind bis zu einer Radlast von 1050 kg bei U = 2400 mm geprüft". Das ist rechnerisch auch noch in Ordnung, da Hinterachse = 2030 kg, aber schon komisch. Hatte heute die Abnahme bei der Dekra (Mitsubishi L200 2019 Facelift), keine Probleme gehabt. Was aber notwendig ist sind Kotflügelverbreiterungen. Ich habe welche von OneWay drauf, und zum Glück die vollständige ABE dabei gehabt (der Zettel aus der Lieferung der Verbreiterung hätte nicht gereicht - gut, dass ich bei OneWay zusätzlich per Mail nachgefragt hatte). Fazit: Ist gut, fährt sich gut, und sieht richtig gut aus!

Please choose an option